Renderoc LA55 Plus

  • Renderoc LA55 Plus 20kg CODE: FC300744-20KG

    ! This product is not available online

     Add to cart

Description:

Renderoc LA55 Plus is a high strength, fluid micro-concrete for large volume structural repairs at a nominal thickness up to 500 mm. Meets the requirements of EN1504-3 Class R4.

Renderoc LA55 Plus

  • CODE: FC300744-20KG
  • Renderoc LA55 Plus 20kg

    • ! This product is not available online

     Add to cart

Product Description:

Description:

Renderoc LA55 Plus is a high strength, fluid micro-concrete for large volume structural repairs at a nominal thickness up to 500 mm. Meets the requirements of EN1504-3 Class R4.

Overview

Typical Applications

  • Deep section patch repair using form pour or pump, all orientatons, section depth between 50-500mm, and requiring high strength, between 30-75 MPa

Advantages

  • Can be applied in sections up to 500 mm thick
  • Achieves 75 MPa @ 56 days
  • Maximum compatibility with concrete compressive strength, 30-75 MPa
  • Unique dual expansion system offers an extremely high level of control of plastic and long-term drying shrinkage
  • Low alkali content minimises risk of alkali-silica reaction
  • Excellent bond to concrete substrates without independent primer
  • Extremely low permeability provides excellent protection against carbon dioxide and chlorides
  • Enhanced durability - Meets the requirements of durability to RMS B80 concrete specification
  • Sustainable product with low carbon foot print and reduced emissions of greenhouse gases
  • Exceptional flow allows pumping or pouring into restricted locations
  • Self-compacting nature eliminates honeycombing and displaces air without vibration
  • Pre-bagged to overcome site-batched variations - only the site addition of clean water is required
  • Contains no chloride admixtures

Test Certificates

Test Certificate
Renderoc LA55 Plus-Chloride Diffusion Resistance
Renderoc LA55 Plus-Chloride Diffusion Resistance
Renderoc LA55 Plus-Electrical Resistivity Test
Renderoc LA55 Plus-Electrical Resistivity Test

Spec Clause

Spec Clauses Refrence
Renderoc LA55 Plus Spec Clause
Renderoc LA55 Plus Spec Clause

Typical Applications

  • Deep section patch repair using form pour or pump, all orientatons, section depth between 50-500mm, and requiring high strength, between 30-75 MPa

Advantages

  • Can be applied in sections up to 500 mm thick
  • Achieves 75 MPa @ 56 days
  • Maximum compatibility with concrete compressive strength, 30-75 MPa
  • Unique dual expansion system offers an extremely high level of control of plastic and long-term drying shrinkage
  • Low alkali content minimises risk of alkali-silica reaction
  • Excellent bond to concrete substrates without independent primer
  • Extremely low permeability provides excellent protection against carbon dioxide and chlorides
  • Enhanced durability - Meets the requirements of durability to RMS B80 concrete specification
  • Sustainable product with low carbon foot print and reduced emissions of greenhouse gases
  • Exceptional flow allows pumping or pouring into restricted locations
  • Self-compacting nature eliminates honeycombing and displaces air without vibration
  • Pre-bagged to overcome site-batched variations - only the site addition of clean water is required
  • Contains no chloride admixtures
Renderoc LA55 Plus-Chloride Diffusion Resistance
Renderoc LA55 Plus-Electrical Resistivity Test
Renderoc LA55 Plus Spec Clause

Technical Data Sheet

Renderoc LA55 Plus TDS

Safety Data Sheet

Renderoc LA55 Plus SDS