Renderoc HB70
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Renderoc HB70 20kg
CODE: FC303030-20KG
! This product is not available online
Add to cart
-
-
! This product is not available online
Add to cartDescription:
Renderoc HB70 is a high build repair mortar for localised repair of reinforced concrete > 45MPa. Meets the
requirements of EN1504-3 Class R4. It can be applied to vertical concrete patches up to 40 mm deep. Suitable for use with Galvashield anode protection systems.
Renderoc HB70
- CODE: FC303030-20KG
- Renderoc HB70 20kg
! This product is not available online
Add to cart
! This product is not available online
Add to cartProduct Description:
Overview
Test Certificates
Application Guide
Spec Clause
Typical Applications
- Vertical & overhead patch repairs
- Localised trowel or wet spray application, up to 1m2 repair area
- Trowel build depth between 10-40mm required, and required strength >45 MPa
Advantages
- Compatible with concrete strength > 45MPa
- High strength - suitable for structural repairs
- Abrasion resistant - suitable for aggressive
- environments
- Shrinkage compensated - provides long term dimensional stability
- Low permeability to potentially damaging water, CO2and chloride ions
- Suitable for use with Galvashield anodes
- Can be applied using wet-spray process - providing faster high build repairs
- Pre-bagged to overcome site-batched variations - only the site addition of clean water required
- Complies to AS/NZS4020:2018 - suitable for use in potable water