Nitoproof 810

Nitoproof 810 15L CODE: FC000608-15L

! This product is not available online
Add to cart

Description:

Nitoproof 810 is a water based polyurethane single component membrane designed for a wide range of waterproofing applications in the built environment. Nitoproof 810 is an alternative to solvent based and moisture curing polyurethane membranes.

Complies with AS/NZS 4654.1:2012

Complies with AS/NZ 4858:2004

Nitoproof 810

CODE: FC000608-15L

Nitoproof 810 15L

! This product is not available online
Add to cart

Product Description:

Description:

Complies with AS/NZS 4654.1:2012

Complies with AS/NZ 4858:2004

Overview

Typical Applications

Suitable for internal and external wet areas
Enabling the direct fix of ceramic tiles
Screeds
Renders over the dried membrane using Nitotile Flex polymer modified cement based tile adhesive

Advantages

Can be flood tested after 48 hours @ 23°C/50% RH
Low VOC
Elastomeric and flexible with excellent elastic recovery
Will not re-emulsify, once cured. Handles permanently wet conditions
Low water absorption
Low water vapour transmission properties
Excellent adhesion to primed surfaces
Compatible bonding properties for tile adhesives (such as Nitotile Flex), screeds and renders
Non-flammable and non-hazardous
Complies with AS/NZS 4654.1:2012
Complies with AS/NZS 4858:2004

Test Certificates

Test Certificate

Nitoproof 810 AS4654.1

Nitoproof 810 AS4858

Nitoproof 810 VOC Content

Nitoproof 810 with UV AS4586

Spec Clause

Spec Clauses Refrence

Nitoproof 810 UV exposed Spec Clause

Nitoproof 810 Spec Clause

Detail Drawing

Detail Drawings

Nitoproof-Balcony edge detail

Nitoproof-Vertical Downward Termination-Pressure Seal

Nitoproof-Drainage Detail for Exposed Membrane

Nitoproof-Membrane Termination at Cavity Parapet

Nitoproof-Detailing around Metal Post Support-before membrane install

Nitoproof-Overflow Pipe Through Parapet Detail

Nitoproof-Overflow Pipe Pre-Formed Splitter through Parapet

Nitoproof-Overflow Pipe through Parapet Detail Pre-Formed Splitter Placed at Corner to Parapet

Nitoproof or Proofex-Vertical Penetration Using a Collar Detail

Nitoproof-Movement Joint Detail with Capping

Nitoproof-Vertical Upward Termination Overflashing Constructed of Liquid Membrane

Nitoproof-Membrane Termination at Doors Opening Higher than Sill

Nitoproof-Membrane Termination at External Doors-Sill with Sub-sill

Nitoproof-Membrane Termination at External Opening Doors no Sub-Sill

Nitoproof-Floor to Wall Bond Breaker Details

Nitoproof-Extent of Treatment of Wet Areas-Meets AS3740

Nitoproof-Under Tile Waterproofing-Exceeds AS3740

Nitoproof-Extent of Treatment of Wet Areas-Exceeds AS3740

Nitoproof-Under Tile Waterproofing (Membrane under screed) Meets AS3740

Nitoproof-Under Tile Waterproofing (Membrane over screed)-Meets AS3740

Nitoproof-Continuous Movement Joint-Expansion Joint

Nitoproof-Membrane Termination at Wall Opening-no upturn

Nitoproof-Service Pipe Entry detail

Typical Applications

Suitable for internal and external wet areas
Enabling the direct fix of ceramic tiles
Screeds
Renders over the dried membrane using Nitotile Flex polymer modified cement based tile adhesive

Advantages

Can be flood tested after 48 hours @ 23°C/50% RH
Low VOC
Elastomeric and flexible with excellent elastic recovery
Will not re-emulsify, once cured. Handles permanently wet conditions
Low water absorption
Low water vapour transmission properties
Excellent adhesion to primed surfaces
Compatible bonding properties for tile adhesives (such as Nitotile Flex), screeds and renders
Non-flammable and non-hazardous
Complies with AS/NZS 4654.1:2012
Complies with AS/NZS 4858:2004