Nitoseal SC800
Nitoseal SC800
Nitoseal SC800 is a low modulus, hight joint movement accommodation, one component silicone rubber joint sealant, with Roadseal® technology.
Typical Applications
- Sealing high movement joints in concrete roads and pavements
Advantages
- Ready to use
- Easy contractor application
- No mixing required
- Fast rate of cure
- Excellent adhesion to clean dry concrete
- Excellent weathering - UV and ozone resistant
- Dispensed from a bulk container by hand or air powered pump
- Large joint movement accommodation
- Application Type (Gun/Pour) : Gun
- Chemical Resistance to spillage : Resistant to dilute acids and alkalis. Not resistant to organic solvents
- Cure rate : 2:1 and an overriding minimum sealant depth of 7 mm
- Full cure : 17 +/- 5
- Joint Movement Capability : Plus 100% - minus 50%
- Number of Components : One
- Service temperature : Minus 50°C - 150°C
- Standards compliance / conforms to : NSW RMS Bridge Decks QA Spec B312
- Tack Free Time : 45 - 60 minutes @ 23°C
- Tooling Time : 20 minutes @ 23°C
Enter dimensions of your application to calculate the volume and pack quantity you will need.
Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.
