Renderoc HB40

  • Renderoc HB40 20kg CODE: FC302020-20KG

    ! This product is not available online

     Add to cart

Description:

Renderoc HB40 is a high build repair mortar for localised repair of reinforced concrete up to 45MPa. Meets the requirements of EN1504-3 Class R3. It can be applied to vertical concrete patches up to 40 mm deep. Suitable for use with Galvashield anode protection systems.

Renderoc HB40

  • CODE: FC302020-20KG
  • Renderoc HB40 20kg

    • ! This product is not available online

     Add to cart

Product Description:

Description:

Renderoc HB40 is a high build repair mortar for localised repair of reinforced concrete up to 45MPa. Meets the requirements of EN1504-3 Class R3. It can be applied to vertical concrete patches up to 40 mm deep. Suitable for use with Galvashield anode protection systems.

Overview

Typical applications

  • Vertical & overhead patch repairs
  • Localised trowel or wet spray application
  • Up to 1m2 repair area
  • Trowel build depth between 10-40mm required
  • Required strength is between 25-40 MPa

Advantages

  • Compatible with concrete strength in the range 30 to 45MPa
  • Abrasion resistant - suitable for aggressive environments
  • Shrinkage compensated - provides long term dimensional stability
  • Low permeability to potentially damaging water, CO2 and chloride ions
  • Suitable for use with Galvashield anodes
  • Can be applied using wet-spray process - providing faster high build repairs
  • Pre-bagged to overcome site-batched variations - only the site addition of clean water required
  • Complies to AS/NZS4020:2018 - suitable for use in potable water

Test Certificates

Test Certificate
Renderoc HB40 AS4020:2018
Renderoc HB40 AS4020:2018
Renderoc HB40 AS1530.3
Renderoc HB40 AS1530.3

Spec Clause

Spec Clauses Refrence
Renderoc HB40 Spec Clause
Renderoc HB40 Spec Clause

Typical applications

  • Vertical & overhead patch repairs
  • Localised trowel or wet spray application
  • Up to 1m2 repair area
  • Trowel build depth between 10-40mm required
  • Required strength is between 25-40 MPa

Advantages

  • Compatible with concrete strength in the range 30 to 45MPa
  • Abrasion resistant - suitable for aggressive environments
  • Shrinkage compensated - provides long term dimensional stability
  • Low permeability to potentially damaging water, CO2 and chloride ions
  • Suitable for use with Galvashield anodes
  • Can be applied using wet-spray process - providing faster high build repairs
  • Pre-bagged to overcome site-batched variations - only the site addition of clean water required
  • Complies to AS/NZS4020:2018 - suitable for use in potable water
Renderoc HB40 AS4020:2018
Renderoc HB40 AS1530.3
Renderoc HB40 Spec Clause

Technical Data Sheet

Renderoc HB40 TDS

Safety Data Sheet

Renderoc HB40 SDS