Conbextra EP10 1.5L Pack
Conbextra EP10
Conbextra EP10 is a low viscosity epoxy grout for grouting small gaps (<10mm) between a base plate and substrate. Conbextra EP10 can be used to fill hairline cracks in concrete slabs.
- Overview
- Key Properties
- Test Certificates
- Application Guides
- Spec Clause
- Brochures
- Product Calculator
Typical Applications
- Grouting small gaps (<10mm) under baseplates
- Crack repair material
Advantages
- High compressive, tensile and flexural strengths
- Resistant to repetitive dynamic loads
- Fast, convenient installation with early strength gain
- Withstands a wide range of chemicals
- Non-shrink and hence ensures complete surface contact and bond
- Low creep characteristics under sustained loading
- 28 day strength @ 20°C dependent on consistency (cube samples) : 83 MPa
- Application method : Gravity feed, pressure injection
- Chemical resistance : Resistant to oil, grease, fats, most chemicals, mild acids and alkalis, fresh water and sea water
- Flexural Strength (modulus of rupture) @ 28 days : 30 MPa
- Gap size : 01 mm to 10 mm
- Indirect tensile strength @ 28 days : 15 MPa
- Pot life @ 20°C : 20 mins
- Service temperature : 10°C to 45°C
- Tack free time : Free flowing
Enter dimensions of your application to caclculate the volume and the bag/kit quantity you will need.
Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.
enter the yield value as shown on the TDS
