Conbextra EP65 Plus 14L Pack
Conbextra EP65 Plus
Conbextra EP65 Plus is an ultra high strength (125MPa) 2 component epoxy grout. It is designed for use as a precision, heavy duty grouting for gaps between 10mm and 100mm.
- Overview
- Key Properties
- Test Certificates
- Application Guides
- Spec Clause
- Detail Drawing
- Brochures
- Product Calculator
Typical Applications
- Grouting under baseplates
- Crane rails turbines where heavy dynamic loads are encountered
- Areas where chemical spillage may occur
Advantages
- Very high compressive, tensile and flexural strengths
- Resistant to repetitive dynamic loads
- Fast, convenient installation with high early strength gain
- Withstands a wide range of chemicals
- Low creep characteristics under sustained loading
- 28 day strength @ 20°C dependent on consistency (cube samples) : 125 MPa
- Application method : Pump or pour
- Chemical resistance : Resistant to oil, grease, fats, most chemicals, mild acids and alkalis, fresh water and sea water
- Flexural Strength (modulus of rupture) @ 28 days : 29MPa (7 days)
- Gap size : 10mm to 100mm
- Indirect tensile strength @ 28 days : 15 Mpa 7 days
- Pot life @ 20°C : 30 mins
- Service temperature : 10°C to 55°C
- Tack free time : 950-2500
Enter dimensions of your application to caclculate the volume and the bag/kit quantity you will need.
Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.
enter the yield value as shown on the TDS
