Conbextra EP300 DP 11.4L Pack
Conbextra EP300 DP
Conbextra EP300 DP is a 3 component epoxy grout for use in applications where heavy dynamic or mobile loads are encountered with gaps upto 300mm. Particularly well suited to applications where long working time and/or large volume grouting is required. Applications include reciprocating machinery, testing equipment, heavy crane and transporter rails, high speed turbines, centrifuges and drop forges, pile head waterproofing. Also for use in conditions where chemical spillage may be encountered.
Typical Applications
- Grouting reciprocating machinery
- Heavy crane and transporter rails
- High speed turbines
- Centrifuges
- Drop forges
- Pile head waterproofing
Advantages
- High compressive, tensile and flexural strengths
- Resistant to repetitive dynamic loads
- Fast, convenient installation
- Withstands a wide range of chemicals
- 28 day strength @ 20°C dependent on consistency (cube samples) : 90MPa
- Application method : Pump or pour
- Chemical resistance : Resistant to oil, grease, fats, most chemicals, mild acids and alkalis, fresh water and sea water
- Flexural Strength (modulus of rupture) @ 28 days : 33MPa
- Gap size : 10mm to 300mm
- Indirect tensile strength @ 28 days : 14MPa
- Pot life @ 20°C : 3 hours
- Service temperature : 10°C to 55°C
- Tack free time : Free flowing
Enter dimensions of your application to caclculate the volume and the bag/kit quantity you will need.
Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.
enter the yield value as shown on the TDS
